Imron 2.1 hg tds
WitrynaDESCRIPTION A high build, high solids, two-component, VOC conforming (2.8 lbs./gal.), high gloss epoxy based on Axalta modified polyamide epoxy technology. The resulting coating is designed to be highly durable and to deliver outstanding corrosion and chemical resistance. SUGGESTED USES Witryna23 cze 2024 · For best results, apply Imron® 3.5 HG-D™ in multiple passes. ® ™ Imron 3.5 HG-D is pre-accelerated. Under normal conditions, additional amounts of accelerator do not significantly improve dry times and is not recommended. ™ For application at 35°F and for best results, use VHY-691 at 2 ozs per mixed gallon.
Imron 2.1 hg tds
Did you know?
WitrynaTDS Spanish; Description. A 2.1 lb/gal (250 g/l) VOC compliant, two-component, satin gloss, epoxy mastic, primer. ... Imron® Industrial Strength 9C01™ Clearcoat. ... WitrynaTDS Spanish Description A 0.8 lbs/gal VOC compliant, high gloss, low HAPS, next generation technology polyurethane topcoat that is suitable for use in any environment where long term color and gloss retention are desired. It can be brush, roll or spray applied. Features High gloss Excellent chemical resistance Excellent color retention
Witryna(Part B) activator for IMRON HG-D, Chem-Bake 1 Step, Colorlast VOC Compliant Tinted Polyurethane & other specified products. ITEM: EC-9T00-ACTVTR Price: $39.99 I have read and agree to "Terms of Sale" Terms of Sale: This product is intended for use by knowledgeable and trained professionals. WitrynaImron 2.1 PR can be topcoated with other Axalta coatings including, but not limited to Imron 2.1 HG polyurethane enamel, Imron 1.2 HG™, Imron 1.5 ST-D™, and Imron 3.5 HG™ high gloss and variable gloss polyurethane enamels. Imron 2.1 PR™ may be used over most aged and hard cured coatings in good condition.
WitrynaImron 2.1 PR™ may be used over most aged and hard cured coatings in good condition. Testing for lifting, bubbling and adhesion is recommended to assure compatibility with … WitrynaTDS Spanish Description A 3.5 lb/gal (420 g/l) VOC compliant, high gloss, low HAPS, polyurethane topcoat that is suitable for use in any environment where long term color …
WitrynaImron 1.2 HG can be applied over Imron 1.5 PR or Imron 1.5 ST-D for a complete waterborne coating system or over Corlar® epoxies when coating rusted surfaces. …
WitrynaImron Elite Basecoat (EY) must be clearcoated. Imron Elite Basecoat (EY) may be clearcoated wet-on-wet with 8840S™3.5 VOC, 8821S™ 2.1 VOC or EZ-3461S™ 3.5 VOC Easy Clean clearcoat. Open time of basecoat prior to clearcoat is between wet-on-wet to 16 hours. ios spy freeWitrynaAXALTA IMRON® 3.5 HG-C Page 1 of 5 Imron® 3.5 HG-C High Gloss Polyurethane Clear GENERAL DESCRIPTION A high gloss, two-package, 3.5 lbs./gal VOC … ioss riceWitrynaImron 3.5 HG + can be applied over other Axalta coatings including, but not limited to Imron Industrial Strength primers and other Imron primers, Imron waterborne … ios spoffer oieWitrynashould be topcoated with Imron® Industrial Strength, Imron 2.1 HG™ + or Imron 3.5 HG™ + or other appropriate topcoat. In high temperature applications, some … onto bolt onsWitrynaImron 3.1 HG-D + can be applied as a DTM over properly prepared: aluminum, hot rolled carbon steel, and weathered galvanized surfaces, in non-corrosive exposures and … on to buildWitrynaImron 2.1 HG Polyurethane Topcoat n/a 3680086 Axalta Imron Elite 3.5 VOC Polyurehane n/a 3680086 Axalta Nason Ful-Thane S/S n/a 3680088 Axalta Nason Ful-Cryl II Acrylic Enamel 3684080 3680080 Axalta ... ios speech to text appios splashboard